Skip to Content

Courses

Print or email this page: Print this page Email a Friend

 

Bachelor of Engineering (Robotics and Mechatronics)/ Bachelor of Commerce

ERM050  070215E



Duration

 Campus and Intake Show intake calendar

Fee*
5 Year/s (Term 4 intake is only available to students progressing from Unilink Engineering.) Hawthorn (Semester 1, Semester 2, Term 4) A$24,200 (annual for 2012) 
*The indicative course fees shown in Course Search apply to international students studying on-campus in Australia for the relevant year only. They are based on a standard study load per year. However, please note that fees are assessed according to a student's study load in each semester, and variation to study load will result in an adjustment to tuition fees. All fees are subject to annual review and may be adjusted.

You will benefit from complementing your robotics and mechatronics knowledge with commerce studies. This double degree will equip you with multidisciplinary and entrepreneurship skills, allowing you to play leading roles in engineering corporations, or to develop your own robotics and mechatronics business ventures.

Go to top

This course brings together the complementary disciplines of robotics and mechatronics, which are founded in the engineering sciences, mathematics and mechanical/electronic engineering. It also addresses management issues that include technology management, accounting and law.
 
Robots are computer-controlled devices that are used to assist humans in various tasks. While the majority of robots are used in manufacturing, a recent trend has seen robots used in a variety of applications including space and underwater exploration, medicine and a wide range of service industries.
 
The discipline of robotics embraces the design and operation of these devices and their integration with other systems in the work environment. Mechatronics combines mechanical, electrical, electronic and software engineering in the design, development and control of diverse systems.

Back to Top


This double degree program equips students with an in-depth knowledge of Robotics and Mechatronics Engineering and a fundamental knowledge of Commerce, which maximises their career opportunities.
 
Program Objectives
 
The following objectives are the typical skills and abilities that Swinburne graduates will have a few years after graduation, as they develop their professional engineer careers:
  • Manage complex robotics and mechatronics engineering projects that are motivational, entrepreneurial, research and/or industry linked
  • Take leadership and mentoring roles during the design and implementation phases of robotics and mechatronics engineering projects
  • Work in local and/or international organisations demonstrating an understanding of global engineering issues
  • Apply robotics and mechatronics engineering technical expertise to industry-related fields
  • Work autonomously and in teams within organisations or as a consultant
  • Apply ethical standards, principles of design for sustainable development, and environmental consideration to conceptualising and implementing industry-related projects
Manage business with strong skills in innovation and entrepreneurship.

Program Outcomes

Graduates, at the completion of their engineering program at Swinburne, should be able to:
  • Apply fundamental knowledge of engineering, mathematics and science
  • Use the techniques, skills and modern tools in robotics and mechatronics engineering to practice as a mechatronic engineer
  • Identify, formulate, solve and evaluate engineering problems
  • Design and conduct experiments as well as to analyse and interpret data
  • Identify and practice professional and ethical responsibility
  • Design and develop engineering solutions to meet desired needs within realistic economic, environmental, social, ethical, health and safety, manufacturing, and sustainability constraints
  • Apply knowledge and skills that are demonstrably in demand by the industry
  • Recognise the need for and to engage in lifelong learning
  • Function and communicate effectively in multi-disciplinary teams
  • Explain basic principles of market-focused business
  • Communicate with a variety of organisational stakeholders
  • Identify and evaluate business problems and present innovative solutions
  • Apply knowledge and practical skills of either finance or management in the field of business

Back to Top


This course operates under a student workload model based on 100 credit points for a full-time academic year. One credit point is deemed to be equivalent to one hour of student work per week over a semester, whether in contact with staff or in private study. The normal full-time load is four units of study per semester, each worth 12.5 credit points. The typical student's average weekly workload during semester is therefore expected to be 50 hours. Total student contact hours, including lectures, classes, tutorials, flexible learning and laboratory and field sessions will vary in different semesters.
 
Students complete 500 credit points made up of:
  • 212.5 credit points of Foundation Studies
  • 87.5 credit points from Technical Studies
  • 25 credit points from Software Engineering Studies
  • 12.5 credit points from Management and Business Studies
  • 150 credit points chosen from Commerce Studies 
  • 12.5 credit points chosen from Specialist Studies
In addition to the above, all Engineering students must complete a minimum of 12 weeks of relevant industry experience. Where students complete Industry-Based Learning, an exemption will be granted for HED400. Please note that due to government regulation international students holding a student visa are not able to undertake IBL.

Careers in the Curriculum (HES0000) (0 credit points)
Students must also complete Careers in the Curriculum. Careers in the Curriculum is an innovative unit designed to assist Swinburne students to enhance their employability and career prospects. Students studying CIC will not incur a HECS or fee debt for the unit as the cost will be met by the university as part of an initiative to enhance students' career skills.
 
Note: All units are 12.5 credit points unless specified otherwise.

Back to Top



Specialist Studies Electives

Management and Business Studies
HES3380 Engineering Management 1
 
Commerce Studies (select a Major in Finance or Management)
 
HBL333N Finance Law

Management Major

Recommended Study Sequence
 
 
 
Commerce Studies unit 1
Commerce Studies unit 2
Commerce Studies unit 3
Commerce Studies unit 4
 
Stage 4
Semester 1
HES3380 Engineering Management 1
Commerce Studies unit 5
Commerce Studies unit 6
Commerce Studies unit 7
Commerce Studies unit 8
 
Approved Engineering Elective
Commerce Studies unit 9
Commerce Studies unit 10

Semester 2
Commerce Studies unit 11
Commerce Studies unit 12
 
# Industry Experience
Students studying on an international student visa must complete Professional Experience in Engineering (HED400). All other students may complete an Industry-Based Learning placement instead (exemption will be granted for HED400 on completion of IBL).
 
Professional Experience in Engineering (HED400): Equivalent of 12 full time weeks of approved relevant engineering practical experience (0 credit points, 0 fees).  To be taken at any stage during the degree. 
 
Industry-Based Learning (Placement 1) (HEW050), Industry-Based Learning (Placement 2) (HEW055): Full time paid placement in industry for 6 (HEW050) or 12 months (HEW050 & HEW055) in an area relevant to your studies (0 academic credit points, unit fees apply). Students should attend an information session one semester prior to the scheduled IBL entry point. Please note that students holding an international student visa are ineligible to undertake IBL. For further information, visit: www.swinburne.edu.au/spl/ibl
 
Students are recommended to complete Careers in the Curriculum (HES0000) prior to their Industry Experience.

Back to Top

Honours:

Swinburne Engineering degrees offer the opportunity for high achieving students to graduate with an Honours grade.
 
Engineering Honours are awarded on the basis of academic achievement in twelve units nominated as representing the key values of the program.  The mark for the student’s first attempt each of in the nominated units is averaged to determine the Honours grade:
 
H1:  Greater than or equal to 80%
H2:  Greater than or equal to 75% and less than 80%
H2B:  Greater than or equal to 70% and less than 75%
H3:  Greater than or equal to 65% and less than 70%

Back to Top


Swinburne offers International Exchange Programs as well as other Education Abroad Programs to help internationalise your degree. International Exchange is an academic program allowing you to study at a Swinburne Partner Institution for one or two semesters during your degree. Swinburne's Partner Institutions offer many relevant subjects as well as a secure base to explore a different culture. Your studies whilst on exchange can be credited towards your Swinburne degree, provided they are relevant and approved by Swinburne. For further information visit the Swinburne Abroad website.

Back to Top


Graduates can take up careers in a wide spectrum of industries including robotics, airlines, chemical industries, automotive, appliance manufacturing and industrial research. Contributions can be made to these industries in a variety of roles including design engineer, project planner, product designer and project manager.

Back to Top


Graduates are eligible to apply for graduate membership of the Institution of Engineers, Australia.

Back to Top


Apply for this course by following the step-by-step process on our How to Apply page.

Back to Top


Swinburne College English for Academic Purposes Advanced level certificate at the undergraduate level (EAP 5: UG-65% ); OR, Obtaining a minimum IELTS overall band of 6.0 (Academic Module) with no individual band below 6.0; OR, a TOEFL (Paper-based) minimum score of 550 (with Test of Written English (TWE) score of 5); OR, a TOEFL (Computer-based) minimum score of 213 (with Written Writing score of 5); OR, a TOEFL (Internet-based) minimum score of 80 with no band less than 20.

Refer to the English Language Requirements website for further information.

Back to Top


Advanced Mathematics. 

Note that Advanced Mathematics studies must be equivalent to the Year 12 VCE Advanced Mathematics subject that includes topics in coordinate geometry, circular (trigonometric) functions, calculus, algebra, statistics and probability.

Back to Top


To assess eligibility for entry to Swinburne, visit the Academic Entry Requirements page.

Back to Top


Enquire online: http://www.swinburne.edu.au/international/enquiry

Email: international@swinburne.edu.au

Phone:
+613 8676 7002 (outside Australia)
Freecall 1800 897 973 (within Australia)

Back to Top


A range of scholarships are available to international students, visit our Scholarship Page for details.

Back to Top
 
Make an Enquiry
How to Apply
Accept Your Offer